::出店予定::

     

Jul 10, 2011

 It's been more than a month since the last firing. I was a bit busy with sewing business and had a strange back pain...but I'm OK now! I did mat glazed firing last night. I made a lot of test pieces and... what I figure out??? hum..not much. BUT...from another work, which I used mixed clay, I kinda see a hit for a solution...need more test piece and more time!! be patient!!!

 最後の窯から、もう既に一ヶ月以上が立ちました.しばらくミシン作業をしたり、ぎっくり腰のような腰の痛みに悩まされてり。。。でももう大丈夫!
昨夜、マット釉の本焼きをしましたーっ。 今回は、たくさんのテストピース。。でも、結果的にはそれほどの収穫なし。。それでも、他に今回焼いた2種類以上の土を混ぜて作った作品には変な貫入が入っていないので、これがいい問題解決策になるかも〜、です!
更なるテストピースと、時間が必要です。あわてない、あわてな〜い!





May 26, 2011

The fourth firing with clear glaze

I did clear glaze firing again.. and, still I'm having a little problem with crack...It seems OK with red clay, but not with white ones... hum.. still I'm learning everyday and can't see the goal yet!
またまた、透明釉の窯を焼きました。そして、またもや貫入のトラブルです。。どうやら南蛮土の方はさほど問題ないようだけど、白土(信楽や古陶など)は、粗い貫入が入り、キレイじゃないです。。 まだまだ学びの毎日です。先は長いな〜〜〜(笑




Apr 27, 2011

The third firing with clear glaze

 I did firing again with clear glaze this time. A lot of pieces with color. Compare to the pieces before firing, which I introduced on this blog before, the color get a lot darker since I used black clay and they look quite different. Still I need to study more about clay and glaze, and relationship between two...but, oh, well...at least I'm enjoying!

 今回は、透明釉をかけた作品の本焼きがあがりました。色ものが多い窯です。黒土の上に色つけしたものが多かったので、今生の状態に色つけされていた時と比べて、焼き上がりのカラーはかなり沈んで見えるものが多いです。
まだまだ、土や釉薬、それぞれの関係性について学ばなければならないことが、たくさんあります!楽しんでいきましょう!




Apr 23, 2011

The socend firing with mat glaze pieces!

 I started firing yesterday afternoon, and the kiln hit the high temperature by the little after midnight and then, I could finally open the kiln around 5pm today. I peeked inside when the kiln was still about 300℃, which I shouldn't do...and thought this firing was bad....but, well, well.. it's not totally success..but, not that bad either. There are still a lot to think about and I need to do more of test firings, but, so far so good!!

 昨日の午後点火して、昨日の夜中すぎに、最高温度に達して電気が切れて、それからゆっくりと冷ましです。今日の午後5時ごろ、やっと窯を開けることができました!じつは窯の中がまだ300℃の頃、本当は開けない方がいいのだけれど、ちょっとだけ覗いてみたときは。。。最悪のできだ〜!と思っていたのですが、結果は。。100点満点ではないけれど、最悪というほどでもない感じでした。もちろんまだまだ改良の余地ありで、これからもたくさんテストピース作りながらの制作が続きそうですが、まずは一歩!進んだッといった感じです!




Apr 22, 2011

Firing right now!

I'm doing glazed firing right now. I will finish by the midnight, and will be able to open the kiln by the afternoon tomorrow. This time, only pieces with mat glaze are fired and the kiln goes up to 1270℃! I'm really excited!!!

ただいま、本焼き焼成中であります!今日の夜中に焼き上がり、冷めるのを待って、明日の午後には窯だしできるかな?といったところです! 今回は、マット釉をかけた作品だけを焼いていて、窯は、1270℃まであがる予定です! 出来上がりが楽しみです〜〜!


Apr 20, 2011

bisque firing, DONE!

This is the third bisque firing and it went well. I will do glaze firing in a few days!! Hope the colors come out OK!!

3度目の素焼き、いい感じにやきあがってきました〜! 近々本焼きしたいとおもいます。 
ほとんどが、色見本のようなものですが、いい色に焼き上がると幸せですっ!

Apr 18, 2011

I will do bisuqe firing tomorrow~~!!

Even though the Lohas Festa was postponed, I'm keeping a good pace for ceramic work. As the picture below, pieces before bisque firing have own quality which I really like. Without glazing, the surface is quite mat, and a touch is fragile but soft...I love pieces on this stage.. But..everything changes when it fired... I hope I can keep this quality after the firing..

ロハスは延期になりましたが、いいペースで製作しています。
したの写真は、素焼き前のものですが、この段階の作品が一番好きなのです。表面のマットな感じと、壊れそうだけれども、優しい手触り。。この質感がなんともいいのです。それでも、釉薬をかけて、本焼きしてしまうと、がらっと表情をかえるのです。。。なんとかこの質感を残した仕上がりにできないものでしょうかね...